Korg D3200 사용자 설명서
103
Counter
Rename
METER
MIXER
CH
VIEW
EFFECT
SEND
EQ
PAN
SONG
SYSTEM
/MIDI
TRACK
CD
UNDO
TUNER
SESSION
DRUMS
STORE
SCENE
MARK
SCRUB
LOC 1/IN ...
LOC 4/END
REC/PLAY
MODE
Transport
keys
2c. FADER/PAN/AUTOMATION
2c-1. Fader Pan
1. Channel pan
[L63...C...R63]
This shows the pan setting for each channel. The value is
shown below the icon.
Use the 1–16 key or 17–32 key to switch between channel
groups, and use the Knob Matrix to set the pan for each
group of sixteen channels.
shown below the icon.
Use the 1–16 key or 17–32 key to switch between channel
groups, and use the Knob Matrix to set the pan for each
group of sixteen channels.
2. Channel fader
[–
∞…+6]
This shows the fader setting for each channel. The value
is shown below the icon.
Use the 1–16 key or 17–32 key to switch between channel
groups, and use the sixteen faders to set the value.
is shown below the icon.
Use the 1–16 key or 17–32 key to switch between channel
groups, and use the sixteen faders to set the value.
3. Level meter
This indicates the master L/R output level.
4. Master fader
[–
∞...+0]
This indicates the MASTER fader setting. The numerical
value is shown below the icon.
value is shown below the icon.
2c-2. Automation
You can turn automation on and record the realtime changes
you make to the mixer settings while the song plays or
records.
The recorded automation can then automatically change the
mixer settings during playback or recording.
you make to the mixer settings while the song plays or
records.
The recorded automation can then automatically change the
mixer settings during playback or recording.
1. Record channel buttons
[
, s]
Use these buttons to select the channels for which you
want to record automation. Events will be recorded for
each channel whose button you click to make it indicate
want to record automation. Events will be recorded for
each channel whose button you click to make it indicate
(Rec) .
2. Record parameter buttons
[Fader, Pan, CH ON, Send, Expression]
Use these buttons to select the parameter for which you
want to record automation. You can select only one
parameter at a time; click a radio button to highlight the
desired parameter.
want to record automation. You can select only one
parameter at a time; click a radio button to highlight the
desired parameter.
If you’ve selected Send, the parameter that is selected in the Send
cell (EFF1, EFF2, AUX1, AUX2) when you begin recording will
be recorded as automation. However, “6. SnapShot” will record
all Send parameters.
cell (EFF1, EFF2, AUX1, AUX2) when you begin recording will
be recorded as automation. However, “6. SnapShot” will record
all Send parameters.
If you select Expression, click the button located at the side to
select
select
(Rec) before you start recording.
3. Master Fader
[
, s]
If you selected “Fader” as the record parameter, and you
want to record the operations of the MASTER fader as
well, click this button to make it indicate “
want to record the operations of the MASTER fader as
well, click this button to make it indicate “
” (Rec).
4. Automation
This button turns automation playback/recording on/off.
OFF:
OFF:
Automation playback/recording will not occur.
On (Play):
Executes automation playback. The Automa-
tion
indicator will light.
During song playback or recording, when the song
reaches the location at which an event is recorded, that
setting will be recalled, automatically changing the set-
tings of the mixer. New automation events will not be
recorded.
ON (Rec):
reaches the location at which an event is recorded, that
setting will be recalled, automatically changing the set-
tings of the mixer. New automation events will not be
recorded.
ON (Rec):
Executes automation playback and event
recording. The Automation indicator will light.
During song playback or recording, when the song
reaches the location at which an event is recorded, that
setting will be recalled, automatically changing the set-
tings of the mixer. In addition, new events will be
recorded for channels whose record channel button is set
to (Rec), according to the settings of the Event Rec
Mode
During song playback or recording, when the song
reaches the location at which an event is recorded, that
setting will be recalled, automatically changing the set-
tings of the mixer. In addition, new events will be
recorded for channels whose record channel button is set
to (Rec), according to the settings of the Event Rec
Mode
dialog box. When the recorder stops, this setting
will automatically change to ON (Play).
If automation is on and you have not stored any scenes, the
Default Scene
Default Scene
will automatically be selected. If you want to
edit scene-related parameters, be sure to store the scene.
1
2
3
4
1
2
1
4
5
2
6
7
8
3
MIXER