Konica Minolta BP-200 사용자 설명서

Internet faxing

200/250/350

6-21

Int

e

rnet fax

in

g

Ch

apt

er

 6

You can add the following functions by pressing the [Fax/Scan] key on the 
control panel, then touching [Menu] on the screen that appears.

2

If the optional fax kit has been installed, [Menu] changes to [Fax Menu].

2

The following functions have no effect, even if settings have been speci-
fied.
- “File name” on the Network tab
- “E-Mail Notification” on the Network tab

Setting 1
**(Set 1)

TSI

Select the entered information, such as this machine‘s name, fax 
number or address, that is printed at the edge of the page. In addition, 
the destination name registered with a one-touch dial button can be 
printed in this information. For details on registering transmission 
source information, refer to “Registering transmission source names” 
on page 9-4.

TX Report

Select under which conditions the transmission report is to be output.
Default: Outputs according to the specifications of the administrator.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission results.

2in1

Select whether to send using the 2in1 function (printing two pages to 
fit on one page).

2-Sided TX

Select whether to perform double-sided transmission. You can spec-
ify the position of the binding margin and the document orientation.

Rotation TX

Select whether to rotate the image according to the paper orientation 
of the receiving machine.
The quality can be specified as 200 dpi or less when sending A4 size.

Setting 2
**(Set 2)

Priority TX

Select whether a job is given priority over others.

Timer TX 
Setting

Select whether to set the send time. Specifies the send time when 
“ON” is selected.

Stamp

Specify whether the document is stamped to indicate that it has been 
scanned. The document must be loaded into the ADF.

2

To use the Stamp function, optional stamp unit must be 
installed.