Avid Technology Car Video System PT 사용자 설명서
Chapter 3: Basic Media Station|PT Workflows
89
15
If you want to display audio waveforms in
the Timeline, click the Fast Menu (located on
the lower left hand corner of the Timeline), and
choose Audio Data > Energy Plot. Ensure that
the new audio tracks appear synchronized with
the originals.
the lower left hand corner of the Timeline), and
choose Audio Data > Energy Plot. Ensure that
the new audio tracks appear synchronized with
the originals.
16
If necessary, make sure the video track’s Mon-
itor button is enabled (purple). This will allow
you to view the video portion of the sequence in
the Record Monitor (or client monitor).
you to view the video portion of the sequence in
the Record Monitor (or client monitor).
17
Press the Home key to move the cursor to the
beginning of the sequence and press the Space-
bar to play the sequence. The new audio should
be synchronized with the video.
bar to play the sequence. The new audio should
be synchronized with the video.
After verifying the new audio sequence is cor-
rectly synchronized, you can do either of the
following:
rectly synchronized, you can do either of the
following:
• Lay audio and video back to tape using Dig-
ital Cut
• Export your sequence as a QuickTime,
MPEG, or other format digital movie.
Methods of Exporting Media
This section covers the following methods of ex-
porting media:
porting media:
• Laying back audio and video to tape
• Exporting to XDCAM
Laying Back Audio and Video to
Tape
Tape
Pro Tools video playback is intended for moni-
toring purposes only, and is not suitable for pro-
fessional layback or broadcast, regardless of the
resolution or frame rate of the video. However,
video output from Media Station|PT is profes-
sional quality. Use Media Station|PT when you
need to output both audio and video to tape. To
avoid dropped frames, it is recommended that
all effects be rendered before performing a lay-
back.
toring purposes only, and is not suitable for pro-
fessional layback or broadcast, regardless of the
resolution or frame rate of the video. However,
video output from Media Station|PT is profes-
sional quality. Use Media Station|PT when you
need to output both audio and video to tape. To
avoid dropped frames, it is recommended that
all effects be rendered before performing a lay-
back.
To record audio and video to tape from
Media Station|PT:
Media Station|PT:
1
Insert a video tape into your VTR. In most
cases, Media Station|PT will present a list of
tapes already associated with this project and
ask you which tape you have inserted.
tapes already associated with this project and
ask you which tape you have inserted.
Fast menu
Enabling the Video track
Fast menu
Monitor
button
button
Select Tape dialog