American Dish Service Vision C3 사용자 설명서
ID Match/Decoded Network ID
Function:
report ID match and decoded network ID
Command:
@CHECKID
Response:
Y,0X####
N,0X####
Y,NoID
N,NoID
N,0X####
Y,NoID
N,NoID
Where:
Y = yes
N = no
0X#### = network ID
NoID = satellite unidentified
N = no
0X#### = network ID
NoID = satellite unidentified
E.6
Installation Commands
To execute the following commands, first put the antenna unit in
idle mode by typing
idle mode by typing
HALT
and pressing “ENTER.” After the
system comes to a halt, type
DEBUGON
and press “ENTER” to
enter programming mode.
Select Active Satellite
Function:
switch antenna tracking to/from satellite A and B
Command:
@L,x
Where:
x = A or B (as defined during the SATINSTALL
process)
Set/Report GPS Position
Function:
reports or sets default GPS position
Command:
GPS<cr>
GPS,XX,D,YYY,E
Response:
GPS = XXD YYYE<cr>
GPS: XXD YYYE
GPS: XXD YYYE
Where:
XX = latitude (0 - 90)
D = S (South) or N (North)
YYY = longitude (0 - 180)
E = E (East) or W (West)
D = S (South) or N (North)
YYY = longitude (0 - 180)
E = E (East) or W (West)
E-7
Maintenance Port Parser Commands
54-0159 Rev. G
Table E-6
Installation Commands
Installation Commands