Adder Technology ADDERLINK X2 사용자 설명서

다운로드
페이지 31




27
Safety information
•  For use in dry, oil free indoor environments only.
•  Do not use to link between buildings.
•  Ensure that the twisted pair interconnect cable is installed in compliance 
with all applicable wiring regulations. 
•  Do not connect the CATx link interface (RJ45 style connector) to any other 
equipment, particularly network or telecommunications equipment.
•  Warning – the power adapter contains live parts.
•  No user serviceable parts are contained within the power adapter - do not 
dismantle.
•  Plug the power adapter into a socket outlet close to the module that it is 
powering.
•  Replace the power adapter with a manufacturer approved type only. 
•  Do not use the power adapter if the power adapter case becomes damaged, 
cracked or broken or if you suspect that it is not operating properly.
•  If you use a power extension cord with the extenders, make sure the total 
ampere rating of the devices plugged into the extension cord do not exceed 
the cord’s ampere rating. Also, make sure that the total ampere rating of all 
the devices plugged into the wall outlet does not exceed the wall outlet’s 
ampere rating.
•  Do not attempt to service the modules yourself.
•  The modules and power supplies can get warm in operation – do not situate 
them in an enclosed space without any ventilation. 
•  The modules do not provide ground isolation and should not be used for 
any applications that require ground isolation or galvanic isolation.
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in 
workmanship and materials for a period of two years from the date of original 
purchase. If the product should fail to operate correctly in normal use during the 
warranty period, Adder will replace or repair it free of charge. No liability can be 
accepted for damage due to misuse or circumstances outside Adder’s control. 
Also Adder will not be responsible for any loss, damage or injury arising directly 
or indirectly from the use of this product. Adder’s total liability under the terms 
of this warranty shall in all circumstances be limited to the replacement value 
of this product. If any difficulty is experienced in the installation or use of this 
product that you are unable to resolve, please contact your supplier.
Getting assistance
If you are still experiencing problems after checking the list of solutions in the 
Troubleshooting section then we provide a number of other solutions:
•  
Adder Technology website – 
   Check the Support section of our website for the latest solutions.
•  
Email 
•  
Fax  
in the UK: 
01954 780081
    
in the US:  
+1 888 275 1117
•  
Phone   in the UK:  
01954 780044
    
in the US:  
+1 888 275 3337