Blaupunkt BUENOS AIRES 200 7 649 020 110 사용자 설명서
30
User settings
User settings
Calling and exiting the user menu
Press the
MENU button
? for approx. 2 sec-
onds to open the menu.
Press the button
AM
=/ FM >
repeatedly until the desired menu item is
selected.
selected.
Perform the setting (see the next section).
Briefl y press the
MENU button to exit the
menu.
Performing settings in the user menu
LO.S
Only possible in FM radio mode: Switching low
sensitivity for station seek tuning on or off. Set-
tings: ON, OFF.
Only possible in FM radio mode: Switching low
sensitivity for station seek tuning on or off. Set-
tings: ON, OFF.
Press the button
2 / 3 to change be-
tween the settings.
NEWS
It is possible only if an audio source is selected:
Switching the priority for news broadcasts on or
off in CD, MP3, WMA and AUX mode and adjust-
ing the minimum time difference between two
switched-through news broadcasts. Settings:
OFF, 00M (no minimum time difference), 10M -
90M (minimum time difference 10 to 90 minutes
in 10-minute increments).
It is possible only if an audio source is selected:
Switching the priority for news broadcasts on or
off in CD, MP3, WMA and AUX mode and adjust-
ing the minimum time difference between two
switched-through news broadcasts. Settings:
OFF, 00M (no minimum time difference), 10M -
90M (minimum time difference 10 to 90 minutes
in 10-minute increments).
Press the button
2 / 3 to change be-
tween the settings.
Note:
News broadcasts are switched through cor-
rectly only if they are identifi ed by the "NEWS"
PTY signal.
News broadcasts are switched through cor-
rectly only if they are identifi ed by the "NEWS"
PTY signal.
AUTO1 / AUTO2 / MANUAL
Possible only in radio mode: Select the mode for
setting stations. Settings: AUTO1 (station seek
tuning), AUTO2 (changing between stored sta-
tions), MANUAL (adjusting the frequency manu-
ally).
Possible only in radio mode: Select the mode for
setting stations. Settings: AUTO1 (station seek
tuning), AUTO2 (changing between stored sta-
tions), MANUAL (adjusting the frequency manu-
ally).
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Press the button
2 / 3 to change
between the settings.
A-MEMORY
Only possible in radio mode: Searching and stor-
ing stations automatically (Travelstore function).
Only possible in radio mode: Searching and stor-
ing stations automatically (Travelstore function).
Press the
AUD button
9 for approx. 2 sec-
onds.
6 stations are stored for the current memory
bank under the station buttons
bank under the station buttons
1 - 6
;. In
FM mode, you can store additional stations
after changing to another memory bank if you
start the automatic station store again.
after changing to another memory bank if you
start the automatic station store again.
AF
Only possible if an audio source is selected:
Switching the alternate frequency (RDS function)
on or off. Settings: ON, OFF.
Only possible if an audio source is selected:
Switching the alternate frequency (RDS function)
on or off. Settings: ON, OFF.
Press the button
2 / 3 to change be-
tween the settings.
If the AF function (RDS) is activated, the device
automatically switches to a station broadcasting
the same programme in case of poor reception.
automatically switches to a station broadcasting
the same programme in case of poor reception.
REG
Only possible if an audio source is selected:
Switching the regional function on or off. Set-
tings: ON, OFF.
Only possible if an audio source is selected:
Switching the regional function on or off. Set-
tings: ON, OFF.
Press the button
2 / 3 to change
between the settings.
If the regional function is activated, the device
changes only to an alternate frequency of the
station that broadcasts the same regional pro-
gramme.
changes only to an alternate frequency of the
station that broadcasts the same regional pro-
gramme.
ATPS
Only possible if an audio source is selected:
Switching automatic seek tuning for traffi c infor-
mation stations on or off. Settings: ON, OFF.
Only possible if an audio source is selected:
Switching automatic seek tuning for traffi c infor-
mation stations on or off. Settings: ON, OFF.
Press the button
2 / 3 to change
between the settings.
쏅
쏅
쏅
쏅
쏅
02_BuenAir200_Stock100_gb.indd 30
02_BuenAir200_Stock100_gb.indd 30
03.12.2008 13:18:02 Uhr
03.12.2008 13:18:02 Uhr