Brocade Communications Systems 53-1001763-02 사용자 설명서

Changing a logical switch to a base switch

10

Example 

sw0:FID128:admin> lscfg --change 5 -newfid 7
Changing of a switch fid requires that the switch be disabled.
Would you like to continue [y/n]?: y
Disabling switch...
All active login sessions for FID 5 have been terminated.
Checking and logging message: fid = 5.
Please enable your switch.
sw0:FID128:admin> fosexec --fid 7 -c "switchenable"

---------------------------------------------------

"switchenable" on FID 7:

Changing a logical switch to a base switch

1. Connect to the switch and log in using an account assigned to the admin role with the 

chassis-role permission.

2. Set the context to the logical switch you want to change, if you are not already in that context.

setcontext fabricID 

where fabricID is the fabric ID of the logical switch you want to change to a base switch.

3. Configure the switch to not allow XISL use, as described in 

4. Enter the following command to change the logical switch to a base switch:

lscfg --change fabricID -base [ -force ] 

where fabricID is the fabric ID of the logical switch whose attributes you want to change.

Specify the -force option to execute the command without any user prompts or confirmation.

5. Enable the switch.

Example 

sw0:FID128:admin> setcontext 7
switch_25:FID7:admin> switchshow
switchName:

switch_25

switchType:

66.1

switchState:

Online   

switchMode:

Native

switchRole:

Principal

switchDomain:

30

switchId:

fffc1e

switchWwn:

10:00:00:05:1e:82:3c:2c

zoning:

OFF

switchBeacon:

OFF

FC Router:

OFF

Allow XISL Use: ON

LS Attributes:

[FID: 7, Base Switch: No, Default Switch: No, Address Mode 0]

Index Port Address Media Speed State     Proto
==============================================
 18  18   1e1200   --    N8   No_Module   FC