Brocade Communications Systems 53-1001763-02 사용자 설명서

Zoning configurations

11

Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y

Clearing changes to a configuration

1. Enter the cfgTransAbort command. 

When this command is executed, all changes since the last save operation (performed with the 
cfgSave, cfgEnable, or cfgDisable command) are cleared.

Example 

In the following example, assume that the removal of a member from zone1 was done in error:

switch:admin> zoneremove "zone1","3,5" 
switch:admin> cfgtransabort 

Viewing all zone configuration information

If you do not specify an operand when executing the cfgShow command to view zone 
configurations, then all zone configuration information (both defined and effective) displays. If 
there is an outstanding transaction, then the newly edited zone configuration that has not yet been 
saved is displayed. If there are no outstanding transactions, then the committed zone configuration 
displays.

1. Connect to the switch and log in as admin. 

2. Enter the cfgShow command with no operands. 

Example 

switch:admin> cfgshow
Defined configuration:
  cfg:   USA1    Blue_zone
  cfg:   USA_cfg Purple_zone; Blue_zone
  zone:  Blue_zone
     1,1; array1; 1,2; array2
  zone:  Purple_zone
     1,0; loop1
  alias: array1  21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
  alias: array2  21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
  alias: loop1   21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
  
Effective configuration:
  cfg:   USA_cfg
  zone:  Blue_zone
      1,1
      21:00:00:20:37:0c:76:8c
      21:00:00:20:37:0c:71:02
      1,2
      21:00:00:20:37:0c:76:22
      21:00:00:20:37:0c:76:28
   zone:  Purple_zone
      1,0
      21:00:00:20:37:0c:76:85
      21:00:00:20:37:0c:71:df