Brocade Communications Systems 53-1001763-02 사용자 설명서

Traffic Isolation Zoning over FC routers

12

FIGURE 40

Traffic Isolation Zoning over FCR

In addition to setting up TI zones, you must also ensure that the devices are in an LSAN zone so 
that they can communicate with each other.

If failover is enabled and the TI path is not available, an alternate path is used. If failover is disabled 
and the TI path is not available, then devices are not imported.

NOTE

For TI over FCR, all switches in the backbone fabric and in the edge fabrics must be running 
Fabric OS v6.1.0 or later.

TI within an edge fabric

A TI zone within an edge fabric is used to route traffic between a real device and a proxy device 
through a particular EX_Port. For example, in 

, you can set up a TI zone to ensure that 

traffic between Host 1 and the proxy target is routed through EX_Port 9.

FIGURE 41

TI zone in an edge fabric

Edge fabric 1

Edge fabric 2

Backbone

fabric

= Dedicated path set up by TI zone in edge fabric 1

= Dedicated path set up by TI zone in edge fabric 2

= Dedicated path set up by TI zone in backbone fabric

= Dedicated Path

-1

-1

Domain 1

Front Domain 3

Xlate Domain 4

Proxy Target

Host 1

Host 2

8

1

9

9

2

10

EX_Ports

E_Ports

= Ports in the TI zone