Brocade Communications Systems 53-1001763-02 사용자 설명서

Deleting a TI zone

12

Deleting a TI zone

Use the zone 

delete command to delete a TI zone from the defined configuration. This command 

deletes the entire zone; to only remove port members from a TI zone, use the zone 

remove 

command, as described in 

1. Connect to the switch and log in as admin.

2. Enter the zone 

delete command.

zone --delete name 

You can delete multiple zones by separating the zone names with a semicolon and enclosing 
them in quotation marks.

3. Enter the cfgEnable command to reactivate your current effective configuration and enforce 

the TI zones.

Example of deleting a TI zone

To delete the TI zone bluezone, type:

switch:admin> zone --delete bluezone

Remember that your changes are not enforced until you enter the cfgEnable command.

Displaying TI zones

Use the zone 

show command to display information about TI zones. This command displays the 

following information for each zone:

•

zone name

•

E_Port members

•

N_Port members

•

configured status (the latest status, which may or may not have been activated by cfgEnable)

•

enabled status (the status that has been activated by cfgEnable)

If you enter the cfgShow command to display information about all zones, the TI zones appear in 
the defined zone configuration only and do not appear in the effective zone configuration.

1. Connect to the switch and log in as admin.

2. Enter the zone 

show command.

zone --show [ name ] [-ascending]

To display information about the TI zone purplezone:

switch:admin> zone --show purplezone
Defined TI zone configuration:

TI Zone Name:

redzone:

Port List:

1,2; 1,3; 3,3; 4,5

Configured Status: Activated / Failover-Enabled
Enabled Status: Activated / Failover-Enabled