Brocade Communications Systems 53-1001763-02 사용자 설명서

Adding a licensed feature

16

An information screen displays the license keys and you will receive an e-mail with the software 
license keys and installation instructions.

Adding a licensed feature

To enable a feature, go to the feature’s appropriate section in this manual. Enabling a feature on a 
switch may be a separate task from adding the license.

For the Brocade 48000 director and the Brocade DCX and DCX-4S enterprise-class platforms, 
licenses are effective on both CP blades, but are valid only when the CP blade is inserted into an 
enterprise-class platform that has an appropriate license ID stored in the WWN card. If a CP is 
moved from one enterprise-class platform to another, the license works in the new enterprise-class 
platform only if the WWN card is the same in the new enterprise-class platform. Otherwise, you 
must transfer licenses from the old WWN to the new WWN.

For example, if you swap one CP blade at a time, or replace a single CP blade, then the existing CP 
blade (the active CP blade) propagates the licenses to the new CP blade.

If you move a standby CP from one enterprise-class platform to another, then the active CP will 
propagate its configuration (including license keys).

1. Connect to the switch and log in using an account assigned to the admin role. 

2. Activate the license using the licenseAdd command.

3. Verify the license was added by entering the licenseShow command. The licensed features 

currently installed on the switch are listed. If the feature is not listed, enter the licenseAdd 
command again.

Some features may require additional configuration, or you may need to disable and re-enable 
the switch to make them operational; see the feature documentation for details.

switch:admin> licenseshow
aAYtMJg7tmMZrTZ9JTWBC4SXWLJMY3QfBJYHG:
    Fabric license
    Remote Switch license
    Remote Fabric license
    Extended Fabric license
    Entry Fabric license
    Fabric Watch license
    Performance Monitor license
    Trunking license
 

4 Domain Fabric license

    FICON_CUP license
    High-Performance Extension over FCIP/FC license
    Full Ports on Demand license - additional 16 port upgrade license
    2 Domain Fabric license
    Integrated Routing license
    Storage Application Services license
    FICON Tape license
    FICON XRC license
    Adaptive Networking license
    Inter Chassis Link license
    Enhanced Group Management license
    8 Gig FC license
    DataFort Compatibility license
    Server Application Optimization license