Tyco Electronics ESY15A2 사용자 설명서

Elo TouchSystems  15A2  User Guide     38

When removing or installing a hard disk drive, first turn the touchcomputer off and

remove the power supply connection.

1.

Place the unit face down and remove the back grill. Then remove the 6 screws as

shown below and remove the back cover insert.

2.

If you have an existing hard drive, remove the existing hard drive by pulling down

and to the left.

3.

Remove the the hard drive caddy from the old hard drive and mount it into the

new hard drive:

4.

 Grasp the handle of the caddy with the new hard drive and slide the hard drive

into the hard drive space. Push the hard drive up until it snap locks into the

connector.

5.

Replace the back cover insert, 6 screws and back grill.