High End Systems Technobeam 사용자 설명서
3-28
Menu Options
Technobeam
®
User Manual
To reset the current lamp hours to zero:
1.
Press and hold the <Menu> button until “ADDR” appears on the LED
display.
display.
2.
Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu
and press the <Enter> button to select the “INFO” menu.
and press the <Enter> button to select the “INFO” menu.
3.
Using the <Up> and <Down> arrow buttons, scroll to the “L/RS” option
and press the <Enter> button to select the “L/RS” option*. The LED will
display “0000” when the lamp hours are reset.
and press the <Enter> button to select the “L/RS” option*. The LED will
display “0000” when the lamp hours are reset.
*Note
This option has a 5-second delay to avoid inadvertent
changes. To reset the lamp hours, you must press and
hold the <Enter> button for at least 5 seconds.
changes. To reset the lamp hours, you must press and
hold the <Enter> button for at least 5 seconds.
Preset Menu (PRST)
The Preset menu allows you to turn preset playback off or on, view
which scene is currently playing, and create/edit a scene using the on-
board memory to program the fixture for stand-alone operation. This
menu also allows you to copy a scene within the fixture’s on-board
memory, capture a scene from your DMX controller to the fixture’s on-
board memory, and enable the fixture’s factory-programmed preset
sequence (self demo).
which scene is currently playing, and create/edit a scene using the on-
board memory to program the fixture for stand-alone operation. This
menu also allows you to copy a scene within the fixture’s on-board
memory, capture a scene from your DMX controller to the fixture’s on-
board memory, and enable the fixture’s factory-programmed preset
sequence (self demo).
Setting Preset Playback (PLAY)
This menu option allows you to turn preset playback on or off and
view which scene is currently playing in preset playback mode.
view which scene is currently playing in preset playback mode.
To set preset playback on or off, or to view the current scene:
1.
Press and hold the <Menu> button until “ADDR” appears on the LED
display.
display.
2.
Using the <Up> and <Down> arrow buttons, scroll to the “PRST” menu.
Press the <Enter> button to select the “PRST” menu.
Press the <Enter> button to select the “PRST” menu.
3.
Using the <Up> and <Down> arrow buttons, scroll to the “PLAY” menu.
(This will be the first option displayed). Press the <Enter> button to
select the “PLAY” menu.
(This will be the first option displayed). Press the <Enter> button to
select the “PLAY” menu.
4.
Using the <Up> and <Down> arrow buttons, scroll to the “ON” option to
set preset playback on, the “OFF” option to set preset playback off, or
the “SCN” option to display which scene is currently playing. Press the
<Enter> button to select the desired option.
set preset playback on, the “OFF” option to set preset playback off, or
the “SCN” option to display which scene is currently playing. Press the
<Enter> button to select the desired option.
Note
Scene 1 must be programmed before the fixture can play
back scenes.
back scenes.