Wacom Bamboo - Capture 사용자 설명서
73
73
PEN INPUT PROBLEMS
The pen does not position the
screen cursor, or otherwise
work.
screen cursor, or otherwise
work.
If the tablet driver does not load properly, pen input will not be
available.
available.
•
For tablet models that combine pen and touch input, basic touch
movement will continue to be recognized but other actions and
gestures will not. If the driver does not properly load, the lower two
ExpressKeys only will function at their default settings of C
movement will continue to be recognized but other actions and
gestures will not. If the driver does not properly load, the lower two
ExpressKeys only will function at their default settings of C
LICK
(bottom key) and R
IGHT
C
LICK
(2nd key up).
•
If you have a pen-only tablet model, you will be able to use the pen
tip to move the screen cursor and click. You will also be able to use
the pen buttons to C
tip to move the screen cursor and click. You will also be able to use
the pen buttons to C
LICK
(lower button) and R
IGHT
C
LICK
(upper
button), but there will be no other pen functionality.
Install the driver software for the tablet.
The pen does not draw or ink
with pressure sensitivity.
with pressure sensitivity.
Some applications require that you turn on the pressure capabilities
within the application or selected tool before the pen will respond as a
pressure-sensitive tool.
within the application or selected tool before the pen will respond as a
pressure-sensitive tool.
Verify also that your application supports pressure sensitivity.
Clicking is difficult.
Open the Bamboo control panel and go to the P
EN
tab. Try using a
lighter T
IP
F
EEL
.
Select the C
LICK
S
OUND
option (the check box should be checked). This
will enable you to hear when the pen registers a mouse click. Your
computer speakers must be turned on and the volume audible before
you can hear a click sound.
computer speakers must be turned on and the volume audible before
you can hear a click sound.
Double-clicking is difficult.
Be sure you are quickly tapping the tablet twice in the same place on
the tablet active area.
the tablet active area.
Using a pen button set to double-click is recommended (review the
techniques in
techniques in
Open the Bamboo control panel and go to the P
EN
tab.
•
Try increasing the D
OUBLE
C
LICK
D
ISTANCE
.
•
Try using a lighter T
IP
F
EEL
.
Windows: Try setting your system to launch programs with a single
click. See
click. See
The pen selects everything,
will not stop selecting.
will not stop selecting.
Open the Bamboo control panel and go to the P
EN
tab. Move the T
IP
F
EEL
slider toward F
IRM
.