Perle Systems Iolan Sds4 Hl Device Server 4030370 사용자 설명서
306
Clustering Slave List
Adding Clustering Slaves
Overview
When you add a clustering slave IOLAN entry, you are adding the IOLAN that users will access
through this master IOLAN.
through this master IOLAN.
Field Descriptions
Configure the following parameters:
Server Name
Specify a name for the slave IOLAN in the clustering group. This name does
not have to correspond to the proper host name, as it is just used within the
not have to correspond to the proper host name, as it is just used within the
IOLAN.
Field Format: Maximum 15 alphanumeric characters, including spaces
Field Format: Maximum 15 alphanumeric characters, including spaces
IP Address
Specify the IP address of the slave IOLAN in the clustering group.
Field Format: IPv4
Field Format: IPv4
Number of Ports
Specify the number of ports in the Slave IOLAN that you are adding to the
clustering group.
Data Options: 1, 2, 4, 8, 18, 24, 36, 48
Default: 1
Data Options: 1, 2, 4, 8, 18, 24, 36, 48
Default: 1
Starting Slave TCP
Port
Specify the first TCP Port number (as specified in the slave IOLAN’s serial
port configuration) on the slave host.
Default: 10001, and increments by one for each serial port
Default: 10001, and increments by one for each serial port
Starting Master
TCP Port
TCP Port
Specify the TCP port number you want to map the first slave IOLAN DS Port
number to. This number should not be a port number that is already in use by
number to. This number should not be a port number that is already in use by
the master IOLAN.
Default: 1024, and then increments by one for each new slave entry
Default: 1024, and then increments by one for each new slave entry
Protocol
Specify the protocol that will be used to access the slave IOLAN port.
Data Options: SSH, Telnet
Field Format: Telnet
Data Options: SSH, Telnet
Field Format: Telnet