Nu Technology NuIPC cPCI-6760DK/P5 사용자 설명서

• Introduction 

• 

Operating temperature: 0 to 60°C 

(Note)

 

• 

Storage temperature: -20 to 80°C 

• 

Humidity: 5% to 95% non-condensed 

• 

Shock: 15G peak-to-peak, 11ms duration, non-operation 

• 

Vibration:  

ü Non-operation: 1.88Grms, 5-500Hz, each axis 
ü Operation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD 

Note:  1. System forced cooling airflow with minimum 5 CFM is required 

for cPCI-6760DK/P5 

 

2. Due to environmental limitation differences from one 
component to another; please refer to the component 
specification when users wishes to mount a HDD on to the 
cPCI-6760DK.  The operating temperature was tested with the 
HDD cabling outside the testing chamber, and with a Low 
Voltage Pentium-III 500MHz CPU.   

 

3. The vibration limitation of operation is caused by the 2.5” ATA 
HDD. If users wish to deploy the cPCI-6760DK/P5 into a high 
vibrating environment, we suggest users to adopt Flash2000 
Flash Disk (FFD series) or CompactFlash Card to replace the 
2.5” ATA HDD. 

• 

CE, FCC Class B 

• 

HALT (temperature and vibration stress) 

Configurations 

+5V 

+3.3V 

+12V 

-12V 

Low Power Pentium III 500MHz, 
256MB with cPCI-R6760D  

2.75A 

3.5A  157mA  0mA 

Note:   The above values are the measured power consumption for SBC 

with CPU and RAM only; the CPU is running at 100% loading with 
HCT, Kpower and burn-in test programs under Windows 2000 
Professional.  The powers for all the other peripheral  devices 
such as add-on cards, HDD, or CD-ROM are not included.