Nu Technology NuIPC cPCI-6760DK/P5 사용자 설명서
Jumpers and Connectors
•
17
Note There are no jumper settings for front side bus (FSB) and CPU
speed selection because the cPCI-6760DK/P5 is equipped with
a pre-soldered BGA2 CPU that is mounted during SMT
manufacturing.
a pre-soldered BGA2 CPU that is mounted during SMT
manufacturing.
2.1.1 JP1 on cPCI-6760DK/P5
JP1
Setting
Function
1
3
Pin 1-2
Short/Closed
Clear CMOS
Content
1
3
Pin 2-3
Short/Closed
Normal Operation
(Default)
Table 3:
JP1 Clear CMOS content
2.1.2 Keyboard and Mouse Combo Connector (CN4) on the
cPCI-6760DK/P5
Pin #
Signal
Function
1
KBDATA
Keyboard Data
2
MSDATA
Mouse Data
3
GND
Ground
4
+5V
Power
5
KBCLK
Keyboard Clock
6
MSCLK
Mouse Clock
Table 4:
Keyboard/Mouse Combo Connector (CN4) on cPCI-6760DK/P5 front board
Note: User can use a Y-cable for connecting PS/2 keyboard and
mouse on this connector. User also can directly connect a PS/2
keyboard on this connector when mouse is not needed.
keyboard on this connector when mouse is not needed.