Nu Technology NuIPC cPCI-6760DK/P5 사용자 설명서
Getting Started
•
37
3.6.3 LAN1, LAN2 Front and Rear I/O Connecting Selection
There are two DIPswitches on the solder side of the cPCI-6760DK/P5.
Those switches were originally designed to supports dual Ethernet
connection both on the front and rear I/O’s on the cPCI-6760D, however; with
the cPCI-6760DK/P5, it uses the DB-6760J3 to re-direct the rear I/O signals
on J3 to the front, therefore there is no LAN1 or LAN2 Ethernet available on
rear I/O. Please keep these switches set as factory default to enable
Ethernet functionalities on the cPCI-6760DK/P5.
Those switches were originally designed to supports dual Ethernet
connection both on the front and rear I/O’s on the cPCI-6760D, however; with
the cPCI-6760DK/P5, it uses the DB-6760J3 to re-direct the rear I/O signals
on J3 to the front, therefore there is no LAN1 or LAN2 Ethernet available on
rear I/O. Please keep these switches set as factory default to enable
Ethernet functionalities on the cPCI-6760DK/P5.
S1, S2: LAN1 Connecting Selection
Switch S1
Switch S2
LAN 1
Connecting
Pin#
State
Pin#
State
S1-1
ON
S2-1
OFF
S1-2
ON
S2-2
OFF
S1-3
ON
S2-3
OFF
Front I/O
Enable
S1-4
ON
S2-4
OFF
Table 23:
LAN1 Connecting Selection
S3, S4: LAN2 Connecting Selection
Switch S3
Switch S4
LAN 2
Connecting
Pin#
State
Pin#
State
S3-1
ON
S4-1
OFF
S3-2
ON
S4-2
OFF
S3-3
ON
S4-3
OFF
Front I/O
Enable
S3-4
ON
S4-4
OFF
Table 24:
LAN2 Connecting Selection
M
DO NOT set S1 and S2 to “ON” or S3 and S4 to “ON” at the
same time. It may cause Ethernet malfunction or damage the
board or devices.
same time. It may cause Ethernet malfunction or damage the
board or devices.