Nu Technology NuIPC cPCI-6760DK/P5 사용자 설명서

42 

•

 Driver Installation 

This chapter describes LAN driver installation for the onboard Ethernet 
controller Intel 82559.  The relative drivers are under the following ADLINK 
CD directory:  X:\CHIPDRV\LAN\100PDISK, where X: is the location of the 
CD-ROM drive.      

The 82559 drivers support the following OS or platforms:   

• 

Windows 98, Windows 95, Windows 2000, Windows NT 

• 

Novell Netware, DOS Setup for Novell NetWare DOS  

• 

UNIX, OS2, Linux  

All the above drivers are included in the ADLINK CD.  In the following section, 
we will describe the driver installation for Windows 98, Windows 2000, and 
Windows NT.  For driver installation of other OS’s, please refer to the readme 
file inside the CD.  

Windows 2000 may install the LAN driver. We recommend you to manually 
install the most updated LAN driver, which is shipped with the ADLINK CD to 
guarantee compatibility.  After installing Windows 2000, please update to the 
new driver by following these procedures.   

1.  Boot  Windows  2000, Click  Start. Select  Settings then double-click 

the Control Panel. 

2.  Double-click System icon, click Hardware tab, click Device Manager 

button. 

3.  Double-click Network Adapters entry, Double-click the  Intel 8255x- 

based PCI Ethernet Adapter (10/100) entry.  

4.  Click Driver tab, then click Update Driver… button.   

5.  An Upgrade Device Driver Wizard window will appear, click Next>.  

6.  Select  Display a list of  ... and click  Next>.  The next window  will 

show a list of hardware models.   

7.  Insert the CD and click Have Disk. 

8.  Browse the Intel 82559 driver in the following path: 

X:\CHIPDRV\LAN\100PDISK,  highlight oemsetup.inf,  click  Open, 
then click OK.