Dacor DRT366SLPH 매뉴얼

9

Burner Components and Igniters

Use care while cleaning the igniters. The porcelain is 

fragile and can crack or break.

IMPORTANT: The igniters may not spark or work 

properly if the burner parts or the igniters them-

selves are not clean and dry.
After disassembling the burners, check for any dirt 

or grime deposited on the individual parts, including 

the igniters.

Use the included igniter cleaning brush to clean 

1. 

completely around the igniter, including all of the 

metal top and porcelain base. A firm toothbrush 

is also ideal for this task. Use care while cleaning 

because the porcelain is fragile and can crack or 

break. Do not use water to clean the igniters. If 

necessary, use a small amount of rubbing alco-

hol to help dissolve grime.
Examine the burner rings. Remove anything 

2. 

stuck in the holes with a straightened paper 

clip, wire or needle. Be careful not to scratch or 

damage the ring and head. Do not distort the 

shape of the burner ring holes.
Clean all of the burner parts, including the 

3. 

burner bases, with window cleaner or rub-

bing alcohol. Use a cleaning brush with plastic 

bristles or a firm tooth brush. When done, rinse 

the parts well with clean water. Dry all the parts 

thoroughly before re-assembling them.
Reassemble the cooktop according to the burner 

4. 

and grate assembly instructions on page 5. 

Test the burners after reassembling them. If 

the flame is uneven, be sure that all the burner 

parts are properly positioned, then check for any 

remaining dirt or grime on the burner parts or 

igniter. If erratic sparking (clicking) is still pres-

ent, make sure the igniter is completely dry. If 

the unit still exhibits problems after drying, call 

your local Dacor Authorized Service Agent.

Care and Cleaning

Grates, Spill Trays and WOK Ring

Do not clean the cooktop grates, burner parts or WOK 

ring in a dishwasher. They will be damaged.

The grates, the spill tray and optional WOK ring are 

coated with a porcelain finish. 

For everyday cleaning, 

•

use a soft cloth or non-

abrasive pad with warm 

soapy water to clean all 

of the porcelain parts.
If necessary, tough 

•

stains may be removed 

by applying full-strength sprays such as Simple 

Green™, Ajax™ All-Purpose Cleaner or Formula 

409™. To minimize wear, use the mildest cleaner 

needed to get the surface clean.
For extremely stubborn stains, you may use a 

•

mildly abrasive cleaner or applicator, such as 

Soft Scrub™, Bon Ami™, S.O.S.

®

 pads or other 

soap-filled steel wool pads. Use these cleaners 

with extreme care and only on occasion. Exten-

sive use of these types of abrasives will eventu-

ally damage the porcelain enamel.

Stainless Steel Surfaces

Always wipe stainless steel (silver colored) surfaces with 

the grain. To prevent scratching, do not use abrasive 

cleaners or scrubbers on stainless steel surfaces.

Use the included Dacor Stainless Steel Cleaner 

•

on the stainless steel surfaces. Use it according 

to the directions on the package. See page 10 

for reorder information.
You may also clean stainless steel surfaces with 

•

a mild solution of detergent and warm water. 

Rinse and dry with a soft, lint-free cloth.

Brass, Chrome and Copper Surfaces

To prevent scratching, do not use abrasive cleaners or 

scrubbers on metal surfaces.

Using a soft cloth, clean metal surfaces with a mild 

solution of detergent and warm water. Rinse and dry 

with a soft, lint-free cloth.
 

 

 

 

 

Burner base

Burner ring

Outer 

burner cap

Inner 

burner cap

Burner ring

Burner cap

Burner base