Intel X520-SR2 E10G42BFSR 사용자 설명서

 

1 

VMDq requires a virtualization operating system that supports VMDq. 

 

2 

Lead and other materials banned in EU RoHS Directive are either (1) below all applicable substance thresholds or (2) an approved exemption applies.

  INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL

®

 PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL 

OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND 

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED 

WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A 

PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.  

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN  

WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

  Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any 

features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or 

incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.  

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published 

specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications  

and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be 

obtained by calling 1-800-548-4725, or by visiting Intel’s Web Site at http://www.intel.com.

  Copyright © 2009 Intel Corporation. All rights reserved. Intel, the Intel logo, and Xeon are trademarks of Intel Corporation in the U.S. and other countries. 
  * Other names and brands may be claimed as the property of others. 
  Printed in USA 

0609/TAR/OCG/PP/100 

 Please Recycle 

322217-001US

General 

Product codes

E10G41BFSR – Intel® Ethernet Server Adapter X520-SR1

E10G42BFSR – Intel® Ethernet Server Adapter X520-SR2

E10G41BFLR – Intel® Ethernet Server Adapter X520-LR1

E10G42BTDA – Intel® Ethernet Server Adapter X520-DA2

Connectors 

One or two LC fiber-optic connectors

SFP+ Direct Attach cables (E10G42BTDA)

Network Standards  

Physical Layer Interface

IEEE 802.3:

10GBASE-SR (E10G41BFSR, E10G42BFSR)

10GBASE-LR (E10G41BFLR)
SFF-8431:

10GSFP+Cu (a.k.a. Direct Attach) (E10G42BTDA)

Adapter Product Features

Intel® PROSet Utility

For easy configuration and management

Plug and play specification support Standard

Receive Side Scaling

Multiple Rx queues enable the efficient  

distribution of network receive processing  

across multiple CPUs in multiprocessor systems

Direct Cache Access (DCA)

The I/O device activates a pre-fetch engine in the 

CPU that loads the data into the CPU cache ahead 

of time, before use, eliminating cache misses and 

reducing CPU load 

Advanced Software Features 

Adapter fault tolerance (AFT)

•

Switch fault tolerance (SFT)

•

Adaptive load balancing (ALB)

•

Teaming support

•

IEEE 802.3ad (link aggregation 

control protocol) 

•

Test switch configuration

•

PCIe Hot Plug*/Active peripheral   

component interconnect (PCI)

•

IEEE 802.1Q* VLANs

•

IEEE 802.3 2005* flow  

control support

•

Tx/Rx IP, TCP, & UDP checksum 

offloading (IPv4, IPv6) capabilities 

(Transmission control protocol 

(TCP), user datagram protocol 

(UDP), Internet protocol (IP)

•

IEEE 802.1p*

•

TCP segmentation/ 

large send offload

•

MSI-X supports Multiple  

Independent Queues 

•

Interrupt moderation

•

IPv6 offloading — Checksum and 

segmentation capability extended 

to new standard packet type 

•

Technical Features

Data rate supported per port:

• Optical: 1 GbE/10 GbE

• Direct Attach: 10 GbE

Bus type

PCI Express 2.0 (5 GT/s)

Bus width

4-lane PCI Express and 8-lane PCI Express 

Interrupt levels 

INTA, MSI, MSI-X

Hardware certifications

FCC B, UL, CE, VCCI, BSMI, CTICK, KCC

Controller-processor

Intel® 82599

Typical power consumption

  SKU

Dual-port 10GBASE-SR/1000BASE-SX

Dual-port Direct Attached

Single-port 10GBASE-SR/1000BASE-SX

Single-port 10GBASE-LR/1000BASE-LX

Maximum Power

10.7 W

8.6 W

8.0 W

8.0 W

Typical Power

10.0 W

7.9 W

6.7 W

6.7 W

Operating temperature

0° C to 55° C (32° F to 131° F) 

Air Flow

Minimum of 100 LFM required

Storage temperature

-40° C to 70° C (-40° F to 158° F) 

Storage humidity

90% non-condensing relative humidity at 35° C 

LED Indicators

LINK (solid) and ACTIVITY (blinking)  

LINK SPEED (green = 10G / yellow = 1G)

Physical Dimensions 

Low-profile PCI Express

5.73 inches long, measured without PCI bracket

Network Operating Systems (NOS)  
Software Support 

Operating System 

IA32

X64

IPF

Windows Vista* SP2

•

•

N/A

Windows Server* 2003 SP2

•

•

•

Windows Server 2008 SP2

•

•

•

Windows Server 2008 SP2 Core

•

•

N/A

Linux* Stable Kernel version 2.6

•

•

•

Linux RHEL 4.7

•

•

N/A

Linux RHEL 5.3

•

•

•

Linux SLES 10 SP2

• 

• 

• 

Linux SLES 11

•

•

•

FreeBSD* 7.0

•

•

•

EFI* 1.1

N/A

•

UEFI* 2.1

•

•

Specifications

To see the full line of Intel Network Adapters for  
PCI Express, visit