Philips SHB9250 사용자 설명서
5
EN
3 Get started
Charge your headphones
Note
•
Before you use your headphones for the first time,
charge the battery for 5 hours for optimum battery
capacity and lifetime.
•
Use only the original USB charging cable to avoid any
damage.
•
Finish your call before charging the headphones, as
connecting the headphones for charging will power the
headphones off.
Connect the supplied USB charging cable to:
• the USB connector of the headphones
and;
• USB power source.
»
LED turns white during charging and
turns off when the headphones are
fully charged.
Tip
•
Normally, a full charge takes 3 hours.
•
When your battery is empty, you can carry on listening
music with an audio cable. Make sure the headphone
are off (and not in idle mode) before using this audio
cable.
Pair the headphones with
your mobile phone
Before you use the headphones with your
mobile phone for the first time, pair it with a
mobile phone. A successful pairing establishes a
unique encrypted link between the headphones
and mobile phone. The headphones store the
last 4 devices in the memory. If you try to pair
more than 4 devices, the earliest paired device
is replaced by the new one.
There are two ways to pair your headphones
with your mobile phone:
• Manual pairing
• NFC pairing
Manual pairing
1
Make sure that the headphones are fully
charged.
2
Press and hold to turn the headphones
on.
3
Press and hold until the blue and white
LED flashes alternately.
4
Turn on the Bluetooth function of your
mobile phone.
»
The headphones are in pairing mode
for 2 minutes.
5
Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
NFC pairing
1
Make sure you turn on the NFC function
on your phone and your phone’s screen
remains active.
2
Place your phone over the headset so that
the NFC detection area of each device can
touch each other.
3
Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
Note
•
Make sure your mobile phone has the NFC feature
available and switched on.
•
Make sure your mobile phone is not in standby mode.
•
Pairing with NFC is only suitable for Android mobile
operating system 4.2 or above.
•
Refer to the user manual of your mobile phone to
identify its NFC detection area.