Perlick 24" C-Series Built-in Beer Dispenser - Solid Stainless Door - Right Hinge 설치 설명서
7
perlick.com
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
10. Before tapping, make sure the beer faucet is closed.
To tap a keg, insert the coupler into the fitting on
top of the barrel. Turn the coupler clockwise until it
stops (about an 1/8 turn), then push down on the
top of the coupler and again turn clockwise until it
stops. Your barrel is now open. Open the CO2 valve
on the regulator as well as the valve on the manifold
if used. Using soap and water solution, check all CO2
connections for leaks indicated by bubbles. Tighten
as needed.