Samsung HMX-F800SP 사용자 설명서

MAINTENANCE

For safekeeping of the camcorder, turn off the camcorder.
-  Remove the battery and power adaptor.
-  Remove the memory card.

To clean the exterior
-  Wipe gently with a soft dry cloth. Do not apply excessive force 

when cleaning. Gently rub the surface.

-  Do not use benzene or thinner to clean the camcorder. The 

exterior coating could peel off or the case could deteriorate.

To clean the LCD screen 
Wipe very gently with a soft dry cloth. Be careful not to damage 
the screen.

•

To clean the lens 
Use a air brush to remove dust, and then wipe the lens gently 
with a soft cloth. 
If necessary, wipe gently with lens paper or tissue.
-  Mould may form if the lens is left dirty.
-  If the lens looks dim, turn off the camcorder and leave it off for 

about 1 hour.

To prolong its service life, do not rub the LCD screen with a 
coarse cloth.
Be aware of the following LCD screen phenomena. They are 
not malfunctions.
-  When you use the camcorder, the surface around the LCD 

screen may heat up.

-  If you leave the power on for a long time, the surface around 

the LCD screen becomes hot.

-  When using the camcorder in cold conditions, an afterimage 

may appear on the LCD screen.

An LCD screen is manufactured using advanced technology 
which creates screens with pixel failure rates of less than 0.01%. 
However, a black or bright spot (red, blue, white) may appear in 
the centre of the LCD screen and up to two spots may appear 
outside the centre. These spots, which are normally incurred 
during the manufacturing process, do not affect the recorded 
images.

•

Maintenance & additional information