Vinotemp VT-38 사용자 설명서

 

 

 
For your protection, this unit is equipped with 
a 3-conductor cord set that has a molded 3-

prong grounding-type plug, and should be 
used in combination with a properly 
connected grounding-type outlet as shown in 

figure A.  
 

It is not recommended to use this cooler with 
an extension cord or power board. Please 
ensure that the appliance is plugged directly 

into the electrical outlet. 

1.  This cooler is designed to be built-in (fully recessed) or free standing. 
2.  Remove all exterior and interior packaging. 

3.  Place your cooler on a flat surface that is strong enough to support 

the unit when fully loaded. 

4.  Do not place the unit in a moist place or display in direct sunlight. 
5.  Do not place heavy objects on top of the unit. 
6.  Do not place the unit next to a major appliance that emits large 

amounts of heat, such as a dishwasher, microwave, oven, etc. 

7.  Unit is not designed for installation in a garage or basement. 
8.  Before connecting the appliance to the power source, let it stand 

upright for approximately 24 hours. This will reduce the possibility of 
a malfunction in the cooling system due to handing during 

transportation. 

9.  Clean the interior surface with lukewarm water using a soft cloth 

before first use. Be sure to wipe dry. 

10.  Do not plug unit into the same outlet as a refrigerator or microwave.