Samsung RS2530BWP 사용자 설명서

24

1)  In order to operate the ice maker properly, water pressure of 20~125 psi(0.138~0.862 Mpa) is

required. In this range, a 6 oz paper cup can be filled in 10 secs.

2)  The water filter removes particles. It does not sterilize or destroy any micro-organisms.

3)  If the refrigerator is installed in area with low water pressure (below  20psi), you should install a boost-

er pump to compensate for the low pressure.

4)  Ensure the water storage tank inside the refrigerator is filled. Push the water dispenser

lever until the water runs from the outlet.

- Shut off the main water supply line and turn the

Ice maker to the off position.

- Locate the nearest cold water line.
- Follow the instructions in the ice maker

installation kit.

- After connecting the water supply with water

filter, turn on water supply and flush 4 or more
gallons into a bucket to clear the water filter.

1. Cold Water line.
2. Pipe Clamp.
3. Water Line Installation Kit.
4. Shut Off Valve.

A Water line installation kit is available at extra cost from your dealer.
Samsung recommends using a water supply kit containing copper tubing.

Connecting to water supply line

DA68-01606B(0.0)-EN  2/28/07 3:24 PM  Page 24