Globe SP8 사용자 설명서

Page 7

• 

DO NOT operate the mixer before reading the instruction manual fi rst.

• 

ALWAYS disconnect or unplug electrical power before cleaning, servicing, or adjusting any parts or

 attachments.

• 

ALWAYS keep hands, hair, and clothing away from moving parts.

NOTE:  Install the bowl BEFORE attaching the agitators.

1.  Lower the bowl by pushing the bowl lift lever backwards and down to its resting position.  

2.  Lift the bowl by the bowl handle and 
 

a.  slowly position the locking pin (located on the rear of the bowl) into the hole in the 

 

 

middle rear of the cradle (see fi g 7-1).

 

b.  lower the bowl onto the pins located on either side of the bowl cradle.

3.  Once the bowl is positioned on the cradle, secure the bowl by pulling both bowl clamps 
 

forward until the bowl is locked tight (see fi g 7-2).

NOTE:  It is easier to install the agitator prior to adding the ingredients into the bowl.

1.  The bowl should be in the lowered position and the bowl guard should be removed    
 (see 

fi g 7-3).

2.  Slide the agitator slowly upwards onto the planetary shaft fi tting the shaft pin through the 
 

slot in the agitator (see fi g 7-4). 

3.  Rotate the agitator clockwise to secure it onto the planetary shaft (see fi g 7-5).

Follow the capacity chart located on page 12 in this owners manual.  
Overloading or not following this chart will damage the mixer and void the 
warranty.

1.  Add the appropriate mixing ingredients into the bowl.

Fig. 7-1

Fig. 7-2

Fig. 7-3

Fig. 7-4

Fig. 7-5