TP-LINK TD-VG3631 사용자 설명서

 

115 

This section introduces what the following features are used for.   

This feature allows you to put a call on hold, in which case the call is not ended but no verbal 
communication is available.   

To put a call on hold, press the FLASH button. To return to the original call, press the FLASH 
button again. 

This feature allows you to redirect the current call to another phone by using the FLASH button 
and dialing the destination number. 

To transfer a call, please follow the steps below: 

1. Press 

FLASH button to put the current call on hold. 

2.  Dial the destination number. 

Note: To quit the transfer, press the FLASH button again to return to the original call before 
hearing the ringback tone. 

3.  Hang up when hearing the ringback tone or wait for the newly called party to answer and then 

hang up. Now the call is successfully transferred. 

With this feature enabled, if a calling party places a call to you while you are busy, you are able to 
suspend the current call and switch to the new incoming call. 

To switch to the new incoming call, press FLASH followed by the number 2. The first call will be 
automatically put on hold. You can switch between the two calls by pressing FLASH followed by 
the number 2. 

With this feature enabled, the caller will be prompted to leave a voice message upon the call or 
when there is no response for a certain time. 

This feature allows an incoming call to be redirected to a specified party. There are three call 
forwarding features, including Call Forwarding Unconditionally, Call Forwarding on Busy and Call 
Forwarding on No Answer.   

9

  With Call Forwarding Unconditionally enabled, no matter whether the called party is busy or 

not, the incoming call will be redirected to the specified party. 

9

  With Call Forwarding on Busy enabled, the incoming call will be redirected to the specified 

party when the called party is busy. 

9

  With Call Forwarding on No Answer enabled, the incoming call will be redirected to the 

specified party when there is no response for a certain time. 

This feature allows you to make a call without your phone number or ID being displayed on the 
called party's phone.