TP-LINK TD-VG3631 사용자 설명서

 

6 

The Router's ports, where the cables are connected, and RESET button are located on the front.   

 

Figure 1-2 

¾

  POWER: The Power plug is where you will connect the power adapter. 

¾

  USB1/USB2: The USB port connects to a USB storage device or a USB printer. 

¾

  PHONE2/PHONE1:The phone port connects to a phone set. 

) 

Port PHONE 2 is designed to ensure power failure tolerance. The analog telephone connected to 
it can still make and receive PSTN calls even when the device is powered off. 

¾

  LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your 

PC or the other Ethernet network devices. Enable EWAN function and you will be able to 
connect to Cable/FTTH/VDSL/ADSL device. 

¾

  LINE:  Connect this port to PSTN phone cable. Or you can connect them by an external 

separate splitter. For details, please refer to 

¾

  ADSL: Through the port, you can connect the Modem Router with the telephone. Or you can 

connect them by an external separate splitter. For details, please refer to 

.  

¾

  Antennas: Used for wireless operation and data transmit. 

¾

  RESET: There are two ways to reset the Router's factory defaults.   

Method one: With the Router powered on, use a pin to press and hold the Reset button for at 
least 5 seconds. And the Router will reboot to its factory default settings. 

Method two: Restore the default setting from “Maintenance-SysRestart”  of the Router's 
Web-based Utility.