TP-LINK 1910010350 사용자 설명서

 

-93- 

Settings,  Diagnostic,  Firmware Upgrade,  Factory Defaults, Backup & Restore, Reboot, 

Password, System Log and Statistics. Click any of them, and you will be able to configure the 

corresponding function. The detailed explanations for each submenu are provided below. 

Choose menu “System Tools→Time Setting”, you can configure the time on the following 

screen. 

 

Figure 4-77  Time settings 

¾

 

Time Zone - Select your local time zone from this pull down list. 

¾

 

Date - Enter your local date in MM/DD/YY into the right blanks. 

¾

 

Time - Enter your local time in HH/MM/SS into the right blanks. 

¾

  NTP Server Prior - Enter the address for the NTP Server, then the Router will get the time 

from the NTP Server preferentially. In addition, the Router built-in some common NTP 

Servers, so it can get time automatically once it connects the Internet. 

1.  Select your local time zone. 

2.  Enter date and time in the right blanks. 

3. Click 

Save to save the configuration. 

1.  Select your local time zone. 

2.  Enter the IP address for NTP Server Prior. 

3. Click 

the 

Get GMT button to get system time from Internet if you have connected to the 

Internet. 

) 

1) 

This setting will be used for some time-based functions such as firewall. You must specify