Netopia R2020 사용자 설명서

In order to suppor t this type of mapping, the private addresses and public addresses are separated and are 
assigned to ranges. Each range consists of a contiguous set of one or more addresses. The router allocates 
the addresses in that range based on the type (static or PAT), and other relevant attributes. The range defines 
the rules for distributing the exterior addresses. NAT maps, kept in a list similar to a firewall or filter list, contain 
the private addresses and the name pointer of the range to use to get a public address. The maps function as 
an access control list to the resource contained in the range.

The Netopia R2020 Router features the following: 

■

Default behavior consistent with previous firmware versions, including PAT to a DHCP- or PPP-assigned 
address.

■

1-to-1 static NAT mapping.

An internal private address is permanently mapped to an external address. TCP and UDP por t addresses 
are not altered.

■

Multiple Many-to-1 PAT mappings on a single inter face.

PAT addresses may be assigned to specific private address subnets; not all internal machines need to be 
included on a PAT remapping list. 

■

Coexistent mapped and unmapped traffic on a public inter face.

If the router's IP address is not included in a NAT list, it will be invisible to the external network.

■

Mapped ser vices (expor ts) may use multiple public addresses.

■

NAT maps per inter face, similar to the filter rules.

MultiNat suppor ts the following IP protocols:

■

PAT: TCP/UDP traffic which does not carr y source or destination IP addresses or por ts in the data stream 
(i.e., HTTP, telnet, ‘r’ commands, tftp, NFS, NTP, SMTP, NNTP, etc.).

■

Static NAT: All IP protocol traffic which does not carr y or other wise rely on the source or destination IP 
addresses in the data stream.

Private Addresses

IP Host

Public Addresses

NAT Type

192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4

206.1.1.1
206.1.1.2
206.1.1.3
206.1.1.4

1:1 Static
1:1 Static
1:1 Static
1:1 Static

206.1.1.5
206.1.1.6

192.168.1.5
192.168.1.6 - 254

Router
Web Ser ver
Mail Ser ver
FTP Ser ver #1
FTP Ser ver #2
LAN Users

1:1 Static
1:Many PAT