Netopia R2020 사용자 설명서

Select IP Address Serving Mode. The pop-up menu offers the choices of Disabled, DHCP Ser ver (the default), 
and DHCP Relay Agent.

If you select DHCP Relay Agent and press Return, the screen changes as shown below.

Now you can enter the IP address(es) of your remote DHCP ser ver(s), such as might be located in your 
company’s corporate headquar ters. Each time you enter an IP address and press Return, an additional field 
appears. You can enter up to four DHCP ser ver addresses.

In the example above, DHCP requests from clients on the LAN will be relayed to the DHCP ser vers at IP 
addresses 10.1.1.1, 20.1.1.1, and 30.1.1.1.

When hosts using AppleTalk (typically those using LocalTalk) are not directly connected to an IP network (usually 
an Ethernet), they must use a MacIP (AppleTalk-IP) gateway.

The optional Netopia AppleTalk feature enhancement kit provides for this ser vice. A MacIP gateway conver ts 
network traffic into the correct format for AppleTalk or IP, depending on the traffic’s destination. The MacIP 
gateway can also distribute IP addresses to AppleTalk computers on the network.

Note: Macintosh computers that have LocalTalk or EtherTalk selected in the MacTCP control panel, or 
“AppleTalk (MacIP)” selected in the TCP/IP control panel, must use the MacIP gateway to communicate with the 
Internet or any other IP network. Users should point their MacTCP or TCP/IP control panel to look in the 
LocalTalk zone for the MacIP ser ver. Macintosh computers that have Ethernet selected in the MacTCP or TCP/IP 
control panel can do their own AppleTalk-IP conversions.

Setting up MacIP involves choosing MacIP dynamic address ser ving and then configuring that type. KIP 
for warding is simply a method for distributing IP addresses to AppleTalk clients.

To go to the MacIP Setup screen, select MacIP/KIP Clients in the IP Address Ser ving screen from the System 
Configuration menu.

■

Select Serve Mac IP/KIP Clients and toggle to Yes, to enable MacIP/KIP address ser ving capability. This 

                              IP Address Serving

         IP Address Serving Mode...         DHCP Relay Agent

         Relay Server #1:                   10.1.1.1
         Relay Server #2:                   20.1.1.1
         Relay Server #3:                   30.1.1.1

Configure Address Serving (DHCP, BOOTP, etc.) here.