Netopia R2020 사용자 설명서

Current Date: The current date; this can be set with the Date and Time utility (see 

).

Default IP Gateway: The router’s default gateway, which may be either manually configured or learned via 
DHCP. This is the value you assigned in the Default IP Gateway field on 

. If you are using the router’s 

defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, 
it is shown here.

CPU Load: Percentage of the system’s resources being used by all current transmissions.

Unused Memory: The total remaining system memor y available for use.

Domain Name Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you 
have assigned an IP address as your default gateway, it is shown here.

Accounting:  Shows whether you have enabled or disabled the call accounting features.

Domain Name: the domain name you have assigned, typically the name of your ISP

Current WAN Port: Indicates which por t is in use.

IP Address: The Netopia R2020’s IP address, entered in the IP Setup screen.

IPX Address: The Netopia R2020’s IPX address, entered in the IPX Setup screen.

EtherTalk Address: The Netopia R2020’s AppleTalk address on its EtherTalk Phase II inter face, entered in the 
EtherTalk Phase II Setup screen (only if the optional AppleTalk feature set is installed).

LocalTalk Address: The Netopia R2020’s AppleTalk address on its LocalTalk inter face, entered in the LocalTalk 
Setup screen (only if the optional AppleTalk feature set is installed).

VPN QuickView. Access point for the VPN QuickView status monitoring screen. See 

.

                                  Quick View             6/17/1999 04:40:47 PM

 Default IP Gateway:  127.0.0.2          CPU Load: 10%   Unused Memory: 541 KB
 Domain Name Server:  0.0.0.0            Accounting: Router remaining: 60:00
 Domain Name: netopia.com                LocalTalk Address:   34448:149
                                         Current WAN Port: Auxiliary Port

 ----------------------IP Address-------IPX Address---EtherTalk-------------------
 Ethernet Hub:        192.163.1.1                     34449: 150

                        Current WAN Connection Status
 Profile Name----------State-%Use-Remote Address-----Est.-More Info--------------
 ISP                   P1    10%  IP 92.163.4.1      Lcl  NAT 192.163.100.6

 VPN QuickView
                                 LED Status
 PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
      LNK RDY CH1 CH2   LNK  LNK   LNK RDY CH1 CH2  DATA | '-'= Off 'G'= Green
  G    -   -   -   -     Y    -     -   -   -   -    -   | 'R'= Red 'Y'= Yellow