Netopia R2020 사용자 설명서

10. When you are finished configuring the filter, select ADD THIS FILTER NOW to save the filter in the filter set. 

Select CANCEL to discard the filter.

To display a view-only table of input (output) filters, select Display/Change Input Filters (Display/Change 
Output Filters) in the Add IP Filter Set screen. 

To modify a filter, select Display/Change Input Filter (Display/ Change Output Filter) in the Add IP Filter Set 
screen to display a table of filters.

Select a filter from the table and press Return to go to the Change Filter screen. The parameters in this screen 
are the same as the ones in the Add Filter screen (see 

).

To delete a filter, select Delete Input Filter (Delete Output Filter) in the Add Filter Set screen to display a table 
of filters. 

Select the filter from the table and press Return to delete it. Press the Escape key to exit the table without 
deleting the filter.

To display a view-only list of filter sets, select Display/Change Filter Sets in the IP Filter Sets screen.

                                      Change Filter

                      Enabled:                    No
                      Forward:                    No

                      Source IP Address:          0.0.0.0
                      Source IP Address Mask:     0.0.0.0

                      Dest. IP Address:           0.0.0.0
                      Dest. IP Address Mask:      0.0.0.0

                      Protocol Type:              0

                      Source Port Compare...      No Compare
                      Source Port ID:             0
                      Dest. Port Compare...       No Compare
                      Dest. Port ID:              0

Enter the IP specific information for this filter.