Netopia R2020 사용자 설명서

The Telnet client mode replaces the normal menu mode. Telnet sessions can be cascaded, that is, you can 
initiate a Telnet client session when using a Telnet console session. To activate the Telnet client, select Telnet 
from the Utilities & Diagnostics menu.

The Telnet client screen appears.

■

Enter the host name or the IP address in dotted decimal format of the machine you want to telnet into and 
press Return. 

■

Either accept the default control character “Q” used to suspend the Telnet session, or type a different one.

■

START A TELNET SESSION becomes highlighted. 

■

Press Return and the Telnet session will be initiated. 

■

To suspend the session, press Control-Q, or whatever other control character you specified.

Two new options will appear in the Telnet screen (not shown):

Resume Suspended Session – select this one if you want to go back to your Telnet session

Terminate Suspended Session – select this one if you want to end the session

Note: The Secure Authentication Monitor field will remain hidden if PAP-TOKEN or CACHE-TOKEN is not the 
selected authentication method in the Connection Profile.

You use the Secure Authentication Monitor screen when placing one type of SecurID connection call. See 

                                   Telnet

         Host Name or IP Address:

         Control Character to Suspend:      Q

                            START A TELNET SESSION

Enter the IP Address/Domain Name of a host.