Netopia R2020 사용자 설명서

다운로드
페이지 312
Connecting Your Local Area Network   4-5
For pinout information on the HD-15 to DB-25 modem cable, see 
Connecting to a LocalTalk network 
If you have purchased the AppleTalk feature expansion kit, you can also connect the Router to an AppleTalk 
network that uses either Ethernet or LocalTalk. Refer to the sheet of optional feature set add-ons in your 
Netopia R2020 documentation folio.
The AppleTalk feature expansion kit includes a dual RJ-11 PhoneNET® connector that attaches to the Auxiliary 
por t on the Netopia R2020.
Netopia R2020 Auxiliary port for connecting to LocalTalk
Connect the male HD-15 end of the LocalTalk cable to the Auxiliary por t on your Netopia R2020. Connect the 
other end of the cable to your LocalTalk network. You can use only one connection on the Auxiliar y por t. You 
cannot use both the PhoneNET connector and an external modem.
If your LocalTalk network is not based on standard PhoneNET cabling, use a PhoneNET-to-LocalTalk adaptor 
cable available from Farallon division of Netopia. Connect the adaptor cable’s RJ-11 connector to the AppleTalk 
cable’s PhoneNet connector. Connect the cable’s mini-DIN-3 connector to your LocalTalk network.
Be sure to obser ve the standard rules governing maximum cable lengths and limits on the number of nodes on 
a PhoneNET network. The dual RJ-11 PhoneNET connector allows inser tion in the LocalTalk daisy chain, or at 
the end. If the device is connected at the end of the daisy chain, you must install the accompanying terminator.
8
Ethernet
Normal/Uplink
Auxiliary
Console
Power
4
7
3
6
2
5
1
Line 2
Line 1
1
Auxiliar y connection por t 
HD-15 (female)