Netopia R2020 사용자 설명서
5-2 User’s Reference Guide
using the router to connect to more than one ser vice provider or remote site.
■
The System Configuration menus display and permit changing:
■
Network Protocols Setup. See
.
■
.
■
IP Address Ser ving. See
.
■
■
.
■
SNMP (Simple Network Management Protocol). See
■
Security. See
.
■
Upgrade Feature Set. See
■
Logging. See
.
■
The Utilities & Diagnostics menus provide a selection of tools for monitoring and diagnosing the router's
behavior, as well as updating the firmware and rebooting the system. See
behavior, as well as updating the firmware and rebooting the system. See
for detailed information.
■
The Statistics & Logs menus display several sets of tables and device logs that show information about
your router, your network and their histor y. See
your router, your network and their histor y. See
for detailed information.
■
The Quick Menus screen is a shor tcut entr y point to the most commonly used configuration menus that
are accessed through the other menu entr y points.
are accessed through the other menu entr y points.
■
The Quick View menu displays at a glance current real-time operating information about your router. See
for detailed information.
Connecting through a Telnet session
Features of the Netopia R2020 may be configured through the console screens.
Before you can access the console screens through Telnet, you must have:
■
a network connection locally to the router or IP access to the router through the WAN por t. This could be
the same connection as the one you used with Smar tStar t.
the same connection as the one you used with Smar tStar t.
Note: Alternatively, you can have a direct serial console cable connection using the provided console cable
for your platform (PC or Macintosh) and the “Console” por t on the back of the router. For more information
on attaching the console cable, see
for your platform (PC or Macintosh) and the “Console” por t on the back of the router. For more information
on attaching the console cable, see
.
■
Telnet software installed on the computer you will use to configure the router