Adaptec 39106 사용자 설명서

Configuring the Adaptec 
SCSI Card 39160 with 
SCSISelect

SCSISelect, which is included with the Adaptec SCSI Card 39160, 
enables you to change SCSI settings without opening the computer 
or handling the card. SCSISelect also enables you to low-level format 
or verify the disk media of your SCSI hard disk drives. The follow-
ing table lists the available and default settings for each SCSISelect 
option. The settings marked as “Auto-sync” are automatically syn-
chronized for both SCSI channels—for example, if you change the 
Boot Channel option to B First on Channel A, the change will apply 
to Channel B as well. All other options can be set separately for each 
of the two SCSI channels.

The default settings are appropriate for most systems and should 
not be changed. Run SCSISelect if you need to change or view cur-
rent settings, or if you need to use the SCSI disk utilities. See the 
descriptions of each option, starting on page 19.

Host Adapter SCSI ID

0-15

7

SCSI Parity Checking

Enabled
Disabled

Enabled

Host Adapter SCSI Termination: 

Ch. A

Ch. B

Automatic
Low On/High On
Low Off/High Off
Low Off/High On
Automatic, 
Enabled, Disabled

Automatic

Automatic

Boot Channel [Auto-sync]

A First, B First

A First

Boot SCSI ID [Auto-sync]

0-15

0

Boot LUN Number

1

 [Auto-sync]

0-7

0