Denon AVR-2112CI 사용자 설명서
20
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey®
Auto Setup.
Auto Setup.
1
Use
ui
to select “Parameter Check” and then press
ENTER
.
Auto Setup
Parameter Check
Auto Setup
Sp. Config. Check
Distance Check
Ch. Level Check
Crossover Check
EQ Check
2
Use
ui
to select the item you want to check, then press
ENTER
or
p
.
Measurement results for each speaker are displayed.
Sp.Config. Check
Check the speaker configuration.
Distance Check
Check the distance.
Ch. Level Check
Check the channel level.
Crossover Check
Check the crossover frequency.
EQ Check
Check the equalizer.
• If “EQ Check” is selected, press
ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use
Use
o
p
to switch the display between the different speakers.
3
Press
RETURN
B
.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Auto Setup settings
If you set “Restore” to “Yes”, you can return to Audyssey® Auto Setup measurement result (value
calculated at the start by MultEQ® XT) even when you have changed each setting manually.
calculated at the start by MultEQ® XT) even when you have changed each setting manually.
Set up speakers (Audyssey® Auto Setup)
Making the network settings
(Network Setup)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
still image (JPEG) files stored on a computer.
1
Connect the Ethernet cable (
2
Turn on this unit (
C
page 5 “Getting Started”
).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in “Network
Connect.” (
When connecting to a network that has no DHCP function, perform the setting in “Network
Connect.” (
Basic v
ersion
A
dv
anced v
ersion
Inf
or
or
mation
Basic v
ersion