Lucent Technologies 555-661-150 사용자 설명서
MERLIN LEGEND Communications System Release 6.1
Network Reference
Network Reference
555-661-150
Issue 1
August 1998
Network Management
Page 5-24
Tandem PRI Facilities
5
■
The Copy Telephone Number to Send setting is set to Copy for the PRI
tandem trunk B-channel group; this setting cannot be changed as long as
the switch type is in effect. For more information, see “Copy Telephone
Number to Send” in the “PRI Facilities” section of
tandem trunk B-channel group; this setting cannot be changed as long as
the switch type is in effect. For more information, see “Copy Telephone
Number to Send” in the “PRI Facilities” section of
System Programming.
DEFINITY ECS and DEFINITY ProLogix Solutions systems use the Interface field
to specify the equivalent of a switch type. It identifies a slot on the local system as
Network or User. User is the usual setting. If the Interface field specifies Network,
the MERLIN LEGEND Communications Systems slot specifies LEGEND-Ntwk. If
the Interface field specifies User, the MERLIN LEGEND Communications
Systems specifies LEGEND-PBX. DEFINITY ECS and DEFINITY ProLogix
Solutions system documentation provides details about the Interface field.
to specify the equivalent of a switch type. It identifies a slot on the local system as
Network or User. User is the usual setting. If the Interface field specifies Network,
the MERLIN LEGEND Communications Systems slot specifies LEGEND-Ntwk. If
the Interface field specifies User, the MERLIN LEGEND Communications
Systems specifies LEGEND-PBX. DEFINITY ECS and DEFINITY ProLogix
Solutions system documentation provides details about the Interface field.
Task List: Switch Type
5
o
Obtain Form 3b, Incoming Trunks: DS1 Connectivity (100D module).
o
Read Chapter 2, “Call-Handling Scenarios,” to see examples showing
Switch Type settings for different private network configurations.
Switch Type settings for different private network configurations.
o
Plan changed or new switch types using the planning guidelines above and
after consulting other system managers in the private network. Record the
new values on the form.
after consulting other system managers in the private network. Record the
new values on the form.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions below or those for
“Switch Type” in the “PRI Facilities” section of
“Switch Type” in the “PRI Facilities” section of
System Programming, or the
summary programming instructions below.
o
When you have finished, file the form with the rest of the planning forms.
Programming Instructions
5
Console Procedure
/LQHV7UXQNV
→
35,
→
6ZLWFK7\SH
→
Dial slot no.
→
(QWHU
→
Specify switch type
→
(QWHU
→
([LW
→
([LW
PC Procedure
→
→
→
Type slot no.
→
→
Specify switch
type
→
→
→