Shiro SB3125 사용자 설명서
SB3125 User Guide
3
2. FUNCTION KEY OPERATION:
FLASH key (600ms)
In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press
REDIAL key or dial out another number.
REDIAL key or dial out another number.
MUTE key
While you are on the line, if you do not want the remote party to hear you, just press and
hold the MUTE key.
hold the MUTE key.
REDIAL key
In the handset off-hook mode, press this key to redial the last dialed number.
PAUSE key
In the handset off-hook mode, press the PABX external line key, e.g. “9” follow by this key to
include a 3 seconds pause before dialing subsequent numbers.
include a 3 seconds pause before dialing subsequent numbers.
P-T key
After switching to Pulse mode, you may press this key to change the dial mode to Tone.
3. ADDITIONAL NOTES:
IN USE LED
While handset is off hook, the LED will turn on.
TROUBLESHOOTING GUIDE:
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.
DECLARATION OF CONFORMITY:
The telephone complies with the essential protective requirements and objectives of:
• EC R& TTE Directive 1999/5/EC
• EC Low Voltage Directive 73/23/EEC
• EC EMC Directive 89/336/EEC
•
• EC Low Voltage Directive 73/23/EEC
• EC EMC Directive 89/336/EEC
•
And conforms to the following relevant harmonized standards:
• EMC: EN55022, EN55024
• Safety: EN 60950
• Safety: EN 60950
Created on 28
th
October 2005. SB3125 Basic Phone.
Please visit us at
www.shirocorp.com
.