Netcomm V85 사용자 설명서

다운로드
페이지 61
V85 Desktop VoIP Phone User Guide 
21
YML772 Rev1 
Network Settings Verification 
Once you complete network settings, restart your V85. Then you should be able to check your V85 
network settings. To check V85 IP address, please follow the steps below:
MENU ► View ► Network Value ► IP Address
You can use V85 keypad PING utility to check whether V85 has Internet access:
MENU ► View ► Ping
Input an Internet host IP address or URL such as 69.90.168.13 or www.google.com, and then press 
“OK”. If your settings are correct, the V85 LCD should display positive results, including the 
“round-trip time” to the remote host.
Hint:  
Another way to verify Internet access for V85 is to watch its LCD screen 
after it has booted up and check whether the correct time is shown. Each 
V85 is pre-configured to communicate a standard Internet Time Server
when it boots up (Australian Eastern Standard Time).  If your V85 can 
successfully get the correct time from pre-configured Internet Server,
then the V85 has the correct network settings.
Hint:  
Once you finish the network setting from keypad, you can jump to the
easier Web-based configuration to complete the rest of configurations
such as SIP and advanced VoIP settings.
VoIP (SIP) Configuration
Note that some of these settings can also be entered via the Web interface as described in the Up 
and Running section at the beginning of the manual.  In most cases, you need apply for a VoIP SIP 
account from a VoIP service provider to make and receive VoIP calls. To have your V85 registered 
on your VoIP service provider SIP server, you need to enter your VoIP account information in the 
V85 SIP settings. The following section will provide detailed information about parameters under 
the SIP menu. 
Configure ► Password(185) ► SIP
VoIP Account Identifiers
About…
Phone Number :*
 
(also called SIP username) In a full-service plan this 
number is mapped against your regular PSTN phone 
number
Password: *
 
Provides account security to protect against 
unauthorised use
VoIP account authentication ID: *
  [=Auth. ID]  Account Identifier
SIP Domain Name:*
 
Enter SIP Domain Name supplied by your VoIP 
service provider
Optional VoIP Configuration:
 
Set in accordance with Service Provider instructions
Local Port:
 
Leave as default unless advised by Service Provider