ZyXEL Communications 4.6 사용자 설명서

다운로드
페이지 358
Chapter 8 Network
Media Server User’s Guide
172
The following table describes the labels in this screen.  
8.6  The PPPoE Screen 
Use this screen to configure PPPoE settings for a direct Internet connection.
Table 32   
Network > UPnP > Port Mapping
LABEL
DESCRIPTION
LAN
Use these fields to specify what port the Internet gateway uses to connect from its LAN 
port to the service on the NSA.
Service Name
This read-only field identifies a service on the NSA. 
LAN Port
Specify the port number (1~65,536) the Internet gateway needs to use to connect from 
its LAN port to the service on the NSA. This is the NSA’s internal port number for the 
service. Changing a service’s port number in this screen also changes it in other NSA 
screens that display it. Similarly, changing a service’s port number in another NSA screen 
also changes it here.
The number below this icon is your Internet gateway’s WAN IP address (the IP address 
your Internet gateway uses for connecting to the Internet). 
WAN
Use these fields to specify what port Internet users must use to connect to the Internet 
gateway’s WAN port in order to connect to the service on the NSA. 
Service Name
This read-only field identifies a service on the NSA. 
Enable WAN 
Access
Select this check box to have UPnP configure your Internet gateway to allow access from 
the Internet to the NSA’s service.
If you clear this check box, people will not be able to access the NSA’s service from the 
Internet unless you manually configure the Internet gateway’s firewall and NAT rules to 
allow access.
WAN Port
When you enable WAN access for one of the NSA’s services, specify the port number 
(1~65,536) Internet uses need to use to connect to the Internet gateway’s WAN port in 
order to access the service on the NSA. Whoever wants to access a service on the NSA 
from the Internet must use this port number.
P2P download’s WAN port must be the same as the LAN port.
Make sure there is not another service using TCP protocol with the same port number. 
If another device is using the same port (the Internet gateway has the same port number 
mapped to another LAN IP address), the NSA overwrites it when you apply the setting and 
WAN users can no longer access the other device.
This icon means the service’s LAN and WAN port numbers must be the same. 
This icon means another service is using the same port number as this service. Change 
the port number of one of the services so they use different port numbers.
This icon means another service is using the listed port, but the port the other service is 
using will be replaced if you apply the setting. The other service will no longer be 
accessible from the listed port.
Apply
Click Apply to save your changes back to the NSA.
Reset
Click Reset to begin configuring this screen afresh.