Oricom PMR1200 사용자 설명서

13

Operation

To Turn ON;
a.  Press and hold the

 POWER button until the LCD screen 

turns ON and displays the current channel.

To switch OFF;
b.  Press and hold the

 POWER button until the LCD screen 

turns blank.

The PMR1200 has 40 available channels, to communicate with 
other radio’s, it must have your radio tuned to the same channel.

a.  Press  the 

MENU button once, the current channel 

number flashes on the LCD Screen.

b.  Press the 

UP or DOWN button to select the desired 

channel. The channel changes from 1 to 40, or vice versa.

c.  Press the 

PTT button to confirm the channel setting.

These are paired with higher channels as output/input (1/31, 2/32, 
etc.)
Check for local repeater activity before using these channels in 
Simplex mode to avoid interference. Channels 9 and above are the 
best choices for general use in Simplex mode.
You can find more information about channels and frequencies by 
visiting the Web site http://www.acma.gov.au
Note:  Refer to the “Channel Table” section of this Owner’s Manual 

Setting the CTCSS sub-channel
Each channel has 38 sub-channels to let you set up group of users 
within the same channel for more private communication. If you 
have set the sub-channel, you can only communicate with other 
radio users tuned to the same channel and sub-channel I.