APC 10-40 KVA 380/400/415 V 사용자 매뉴얼

차례

• Safety

  5
  • IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

    5
• Prepare for Floor-Anchoring (optional)

  6
• System arrangements

  6
• Hole positions for a stand-alone UPS enclosure with L-shaped anchoring brackets

  7
• Hole positions for up to four UPS units in parallel with U-shaped anchoring brackets.

  8
• Prepare for Cables

  9
• Remove the front panel

  9
• Remove the top cover

  9
• Remove the cable landing cover and bottom plates

  10
• Remove the XR Battery Modules

  11
  • Anchor the UPS and additional XR Battery or UPS Enclosure(s) (optional)

    12
• Run the Cables

  15
  • Connect Power in Installations with Busbars

    15
• Install isolators

  15
• Install busbars

  16
  • Connect Power in Installations with Cables

    20
• Install power cables

  20
  • Connect Communication Cables

    22
  • Connect the EPO

    23
• Connect the EPO to the UPS and the XR Battery Enclosure

  23
• Final Mechanical Assembly

  24
  • Level the Enclosures (L-shaped Floor Anchoring Brackets) and Install Batteries

    24
• Level the enclosures

  24
• Install battery-securing and floor-anchoring brackets

  25
  • Reinstall the Enclosure Plates

    26
• Reinstall the cable landing cover plates and the bottom plates

  26
• Reinstall the top cover, battery compartment cover, and the front panel

  26
• Specifications

  27
• Battery voltage and current

  27
• Recommended cable sizes

  27
• EPO requirements

  27
• Torque specification

  27
• Post-Installation Checklist

  28