사용자 설명서차례Setup Guide1HP PSC 5001Owner’s Information2Setup Guide HP PSC 5003©Copyright Hewlett-Packard Company 19994Note: Regulatory information can be found in Chapter6 of the HP PSC 500 CustomerCareGuide.4Chapter 1 — Setting Up Your HP PSC 5005Chapter 2 — Sharing HP PSC 500 on a Network5About This Guide6Conventions Used6Setting Up Your HP PSC 5007Setting Up Your HPPSC 5007Step 1 — Unpack Your HPPSC 50071 Remove the cardboard tray containing the accessory items.72 Rest the box on its side, and pull out your HPPSC 500.73 Make sure the following items are included with your HPPSC 500:8a Bi-directional, parallel, IEEE 1284-compliant printer cable with 1284-C connector.8b Power supply (AC/DC adapter) with attached cord (HP part number 0950-2880).8c Power cord.8d CD-ROM disk(s).8e Three manuals: HPPSC 500 Setup Guide, HPPSC 500 Basic Operations Guide, and HPPSC 500 Custom...8f One black and one color print cartridge.84 Choose a location and environment for your HPPSC 500.85 Remove the packaging materials (plastic wrap, cardboard insert, and packing tape) from the outs...9Step 2 — Load Paper in Your HPPSC 50091 Slide the paper width and length adjusters to their outermost positions.92 Insert paper into the IN tray, print side down, until it stops.93 Slide the paper width and length adjusters in until they stop at the edges of the paper.94 Push the IN tray back toward the unit until it stops, and lower the top (OUT) tray if you raise...10Step 3 — Install Print Cartridges101 Locate the print-cartridge access door on the front of the HPPSC 500, just above the OUT tray.102 Pull the latch on the print-cartridge access door toward you and raise it up until it is fully ...103 Remove the cardboard insert from the inside of the unit.104 Raise both latches on the carriage.105 Remove the color print cartridge (the thicker one) from its packaging and, being careful to tou...116 Push the color print cartridge firmly down into the slot on the left.117 Remove the black print cartridge (the thinner one) from its packaging and, being careful to tou...128 Push the black print cartridge firmly down into the slot on the right.129 Lower each print-cartridge latch down onto the top of the cartridge, and push down until the la...1210 Close the print-cartridge access door.12Step 4 — Connect the Printer Cable and Power Cords13Connecting the Printer Cable131 Locate your printer cable.132 Connect the printer cable to the HPPSC 500. Pinch the clasps at the back of the cable as shown...133 Plug the other end of the cable into your computer’s parallel port. The parallel port is locate...14Connecting the Power Cords141 Locate the power supply adapter with attached cord.142 Plug the power supply adapter into the back of the HPPSC 500.143 Locate the power cord.154 Plug the adapter end of the power cord into the power supply adapter.155 Plug the power outlet end of the power cord into the power outlet.15Step 5 — Install the HPPSC 500 Software16Installing the HPPSC 500 Software161 Turn on your computer, but do not turn on your HPPSC 500.162 If you see either of the following windows, click Cancel or press Esc on your keyboard. Otherwi...163 Insert the HPPSC 500 CD-ROM into your computer’s CDROM drive.17a On your Windows desktop, double-click the My Computer icon.17b Double-click your CD-ROM disc drive.174 Click the Install button.175 When the Welcome window appears, click Next.186 In the Software License Agreement window, click Yes.187 After the message appears that instructs you to turn on the unit, press the white power button ...188 The Question window appears, click Yes to accept the preset defaults.199 Determine the results of the cable connection test.19a Click Continue to finish installing the HPPSC 500 software.20b After installing your software, see “Communication problems” in the Readme file. To access the ...2010 After the Product Tour window appears with the the product tour option selected, click Finish.2011 In the Product Tour window, click any topic to learn more about that topic.2012 After you are finished, click Quit to exit the tour.2013 If prompted, restart your computer.211 Insert the HPPSC 500 CD-ROM into your computer’s CDROM drive.212 From the HPPSC 500 Essentials menu, click Run Product Tour.21Registering Your HPPSC 50021Installing OCR Software211 Insert the HP PSC 500 CD-ROM into your computer’s hard drive.212 From the HP PSC 500 Essentials menu, click Readiris OCR.213 Follow the directions in the Readiris software installation window.21Installing Third-Party Programs21Step 6 — Align Your Print Cartridges221 If “Press Resume to Align Cartridges” appears on the front-panel display of your HPPSC 500, pr...222 Following the instructions on the page, use the front-panel buttons to select three sets of lin...22Sharing HP PSC 500 on a Network23Understanding Point-and-Print and Peer-to-Peer Networks23Local Area Network (LAN) Access23Minimum System Requirements24Setting Up the Server241 Install the HPPSC 500 software on the server, as described in Chapter1 under “Installing the ...242 If you are using Windows95/98 as your server, perform the following steps before continuing.24a On the Windows desktop, right-click Network Neighborhood, and choose Properties.24b On the Configuration tab, click File and Print Sharing.24c Select the check box for the sharing options you want.24d Click OK to store your changes, and then click OK again to exit the File and Print Sharing dial...243 Restart the computer.244 If an electronic registration window appears, follow the on-screen instructions to register you...245 On the Windows taskbar, click Start, point to Settings, and choose Printers.246 Right-click the HPPSC500 icon, and choose Sharing.247 Click the Shared (WindowsNT4.0) or Shared As (Windows95/98) option.248 In the Share Name field, type a name for the HPPSC if you do not want to use the default name,...24a Click Alternate drivers, and then click Windows95.25b After the message instructing you to insert the floppy disk appears, click OK and insert the HP...25c In the Printer Drivers for Windows95 dialog box, click Browse, open the AddPrinter folder, ope...259 Click OK to close the dialog box and store your changes.25Setting Up a Point-and-Print Client251 On the Windows desktop, double-click Network Neighborhood.252 Find the name of the server that the HPPSC is directly connected to, and double-click its icon.253 Double-click the HPPSC’s share name.254 After the setup message “Before you can use the printer...” appears, click Yes and then wait se...25Setting Up a Peer-to-Peer Client (95/98 server to NT4.0 client)261 Set up the server by following the steps outlined earlier under “Setting Up the Server.”262 In the first Add Printer Wizard dialog box, select My Computer, and click Next.263 In the next dialog box, click New Port.264 In the Printer Ports dialog box, choose Local Port, and click New Port.265 In the Port Name dialog box, type in the name of the server to which the HPPSC is connected an...266 Click OK to close the Port Name dialog box and store your changes, and then click Close on the ...267 In the Available Ports list, verify that the newly created port exists, and then click Next.268 Click Have Disk, and insert the HPPSC software CD.269 If the HPPSC500 Essentials menu appears, click Quit.2610 Change the name of the drive letter to point to your CDROM drive, and click Browse.2611 In the Locate File dialog box, open the AddPrinter folder, open the wNT folder, and double-cli...2712 In the Install From Disk dialog box, click OK.2713 If another message appears, point to the same location on the CD, and click OK.2714 Select HPPSC, click Next, and click Next again.2715 To set the HPPSC as your default printer, click Yes, and then click Next.2716 Select Not shared, and click Next.2717 Select Yes to print a test page, and click Finish.2718 If your test page printed correctly, click Yes.27A29C29D29E29I29M29N29P29R29S29T29Visit us on the World Wide Web32http://www.hp.com/go/all-in- one32• Updated Drivers32• User Forums32• Product Information32• Frequently Asked Questions32• Productivity Tools32*C7281-90102*32*C7281-90102*32C7281-9010232크기: 1.77메가바이트페이지: 32Language: English매뉴얼 열기