사용자 설명서차례Step 1: Check the Installation Kit11.1 Read this handbook1The autopilot system – core pack contents1The autopilot system – other key components3The autopilot system – extended systems31.2 Obtain installation tools41.3 Check parts supplied4Step 2: Check Locations62.1 Identify suitable locations62.2 EMC installation guidelines7Step 3: Install the Course Computer93.1 Select the location10Suitable locations10Unsuitable locations11Orientation113.2 Secure the course computer123.3 Remove the connector cover12Connecting cables to the terminals14Using the fuses143.4 Attach the power cables15Step 4: Install the Compass17Select the location18Mount the compass20Connect to the course computer20Connecting SeaTalk or NMEA compasses21Step 5: Install the Rudder Position Sensor225.1 Rotary rudder position sensor - installation22Introduction22Ensuring correct alignment23Securing the sensor to the boat24Attaching the sensor to the tiller arm24Checking alignment25Connecting to the course computer255.2 Linear rudder position sensor - installation26Introduction26Mounting26Step 6: Install the Drive Unit28Step 7: Install the Control Unit29Step 8: Clamp the Cables30Step 9: Integrate the System319.1 Connecting SeaTalk equipment32Possible systems329.2 Connecting NMEA equipment36Course computer NMEA inputs/outputs36Control unit NMEA inputs38SeaTalk/NMEA interface38Connecting several items of NMEA equipment389.3 Connecting optional components40GyroPlus yaw sensor40Handheld remotes40External alarm40Wind vane (sail boats)40Off switch41Other manufacturers’ drive units419.4 Setting-up the autopilot42Maintenance43Regular checks43Fault-finding43Servicing43EMC, servicing and safety guidelines44Product support44Specifications45Control unit functionality46Glossary47Index49크기: 1.96메가바이트페이지: 64Language: English매뉴얼 열기