Roberts Radio 205 Manual Do Utilizador

A 3.5mm stereo Auxiliary Input socket located on the rear of your radio 

is provided for connecting the audio signal from an external audio source 

such as an iPod, MP3 or CD player.  

1.  Connect a stereo lead from the headphone output of your iPod, MP3 

or CD player to the Aux In socket located at the rear of the radio. 

Typically this lead will have a 3.5mm stereo plug at both ends. 

2.  Switch on your radio.

3.  Press the Mode button until AUX in mode is shown on the display.

4.  Press the 'play' on the connected audio device. Use the volume control 

on the connected device to adjust the volume from the radio. 

 

Note: The radio's volume control will have no effect in Aux In mode.

5.  After  use,  disconnect  your  player  in  order  to  listen  to  your  radio 

conventionally. Either switch off your radio or select an alternative 

operating mode using the Mode button.

 

Note: If you do not disconnect your player when you switch to other 

modes, you may find that the audio volume from the radio is reduced, 

or that you can hear the player and the radio at the same time.

3

1