Stamina Products 20-2015 Manual Do Utilizador

1.  To store the 

STAMINA│X - Hyper Bench, simply keep it in a clean dry place.

2.  Use two people to lift from the 

LEFT and RIGHT HANDRAILS(6, 7) and REAR STABILIZER(1) to 

move the 

3.  Follow the process below to fold the 

STAMINA│X - Hyper Bench as illustrated for easy storage.

The safety and integrity designed into the 

STAMINA│X - Hyper Bench can only be maintained when the 

STAMINA│X - Hyper Bench is regularly examined for damage and wear. Special attention should be 

given to the following:

1.  Verify that the 

CAUTION LABEL(33) is in place and easy to read. Call Stamina Products immediately 

at 

1-800-375-7520 for a replacement CAUTION LABEL(33) if it is missing or damaged.

2.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

3.  Verify  that  all  nuts  and  bolts  are  present  and  properly  tightened.  Replace  missing  nuts  and  bolts.  

Securely tighten loose nuts and bolts.

4.  Worn  or  damaged  components  shall  be  replaced  immediately  or  the 

removed from service until repair is made.

5.  Only Stamina Products supplied components shall be used to maintain/repair the 

6.  Keep your 

STAMINA│X - Hyper Bench clean by wiping it off with an absorbent cloth after use.

a.  Loosen but do not remove the 

SECURING KNOB(14). Loosen and pull the ADJUSTMENT KNOB(13), 

slide the 

CUSHION(12) to the lowest position. Then lock in position by tightening the ADJUSTMENT 

KNOB(13) and SECURING KNOB(14).

b.  Remove the 

LOCKING PIN(15) from the MAIN SUPPORT(3) to fold the FRONT SUPPORT(4). Store 

the 

LOCKING PIN(15) in the hole in the FRONT SUPPORT(4).

c.  The 

STAMINA│X - Hyper Bench should appear as shown in illustration B after folded.