Impex MWM-1100 Manual Do Utilizador

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and
Allen Wrenches. NOTE: It is strongly recommended that this machine to be
assembled by two or more people to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Slide two Ø 2 ½” x 1” Rubber Bumpers (#35) onto the two Guide Rods (#5). Insert

the two Guide Rods into the holes on the Rear Stabilizer (#2). Secure each Guide
Rod with one M10 x 1” Allen Bolt (#62) and one

∅

¾” Washer (#70) from the

bottom.

B.) Do not tighten Nuts and Bolts starting from this step until instructed to do

so.

C.) Attach the rear of Main Base Frame (#1) to the Rear Stabilizer. Secure them with

two M10 x 2 ½” Carriage Bolts (#60), one 4 3/8” x 1 ¾” Bracket (#22), two Ø ¾”
Washers (#70), and two M10 Aircraft Nuts (#72).

D.) Attach the Vertical Frame (#3) onto the Main Base Frame. Secure them with two

M10 x 2 ½” Carriage Bolts (#60), one 4 3/8” x 1 ¾” Bracket (#22), two Ø ¾”
Washers (#70), and two M10 Aircraft Nuts (#72).

DIAGRAM 1